Edit features in scenes—Portal for ArcGIS | Documentation for ArcGIS Enterprise

You can create, update, and delete data in scenes with feature layers that are enabled for editing and scene layers with an editable associated feature layer. Make edits to attributes and use interactive handles to modify geometry, such as moving, reshaping, rotating, or resizing. When a scene has a layer or layers that are editable, the Edit button Editor displays on the Designer toolbar.

When you update a feature or create features, the edits are saved to the feature service. Saving edits does not require you to save the scene. Edits to scene layers are applied directly from their associated feature service and support a limited amount of edits until you need to rebuild the cache. Scene layer caches are optimized for displaying large amounts of 3D data in a scene, and it is recommended that you manage the cache as appropriate for your workflows to achieve best performance. Also, you can define permissions so that a layer is public and users do not need to sign in to your organization to save edits.

Tip:

When updating or creating features, use snapping options for more control and precision when editing.

Edit a feature

To edit an existing feature, complete the following steps:

On the Designer toolbar, click Edit to open the Editor pane.
Under Edit features, the Select button is selected.
Note:
The Select button must be selected to edit features.
Click the feature in the scene you want to edit.
The feature is highlighted with interactive handles, and the Edit feature pane appears, allowing you to edit the attributes of the selected feature.
Edit the geometry to reshape, resize, rotate, or move.
For points, do any of the following:
1. Move the point feature horizontally and vertically with the interactive handles.
  This is available when z-values are allowed in the feature service.
2. Rotate the point feature with the interactive handles.
  This is available when there is a rotation attribute value in the feature service.
For lines and polygons, do any of the following:
1. Use the interactive handles to resize, rotate, or move the feature horizontally and vertically.
2. Click the feature again to move individual vertices to reshape the feature. You can also click vertices in the middle of a segment to add vertices. This allows you to further reshape the feature by dragging vertices.
3. Click again to use the interactive handles.
Press Z to undo the last geometry edit. Press R to redo the geometry edit.
For 3D objects, do any of the following:
1. Use the interactive handles to move the feature horizontally and vertically.
2. Switch to resize or rotate with interactive handles.
Edit the text or numeric attribute values.
1. Click the attribute field.
2. Change the text or numeric value.
3. Continue to change additional attribute values.
Click Update to save the changes to the attributes and geometry to the service.
Click Back at any time to return to the Editor pane.
If there are unsaved edits, do one of the following:
1. Click Continue editing to continue editing features.
2. Click Discard edits to return to the Editor pane without saving the edits.
Click Delete to remove the feature from the service.
Do one of the following:
1. Click Keep feature to continue editing features.
2. Click Delete to delete the feature and return to the Editor pane.
When you are finished editing data, click Edit or click another tool on the Designer toolbar to close the Editing pane.

Note:

The published layer configuration determines the available editing options. For example, you can only move features vertically when z-values are allowed in the published feature service.

Create features

Note:

At this release, uploading 3D models in web scenes is a beta feature. While in beta, this feature may not be feature complete and, as such, may have known performance or quality issues and will not be supported by Esri Technical Support.

To create features, complete the following steps:

On the Designer toolbar, click Edit to open the Editor pane.
Under Create features, choose a feature template to add new features to the layer by drawing or uploading a 3D model for placement (beta).
Click in the scene to create features.
1. For points, click a location in the scene to add a point.
2. For lines, click a location in the scene to start drawing a line. Move the mouse pointer and click to add points. You can also press F to add a point. Double-click or press Enter to complete the line.
3. For polygons, click a location in the scene to start drawing a polygon and click to add points. You can also press F to add a point. To finish the polygon, click the first vertex, double-click, or press Enter.
4. For 3D objects, click Upload to upload a 3D model that you can place.
  Once the model is uploaded, click a location in the scene to place the model.
  Supported model formats are .dae, .dwg, .fbx, .gltf, .glb, .ifc, .obj, .usdc, and .usdz.
After the feature is created, edit the geometry to move, reshape, resize, or rotate.
For points, do any of the following:
1. Move the point feature horizontally and vertically with the interactive handles.
  This is available when z-values are allowed in the feature service.
2. Rotate the point feature with the interactive handles.
  This is available when there is a rotation attribute value in the feature service.
For lines and polygons, do any of the following:
1. Use the interactive handles to resize, rotate, or move the feature horizontally and vertically.
2. Click the feature again to move individual vertices to reshape the feature. You can also click vertices in the middle of a segment to add vertices. This allows you to further reshape the feature by dragging vertices.
3. Click again to use the interactive handles.
4. Press Z to undo the last point added. Press R to redo adding the point.
For 3D objects, do any of the following:
1. Use the interactive handles to move the feature horizontally and vertically.
2. Switch to resize or rotate with interactive handles.
Fill in the attribute fields.
Click in the scene again to create more features of the chosen feature template.
Click Create to save the new features to the feature service and return to the Editor pane.
The Create button displays the number of features that will be created.
Tip:
You can create multiple features, one after the other, by clicking outside of the interactive handles of the previous feature.
Click Back at any time to return to the Editor pane.
If there are unsaved edits, do one of the following:
1. Click Continue editing to continue creating features.
2. Click Discard edits to return to the Editor pane without saving the edits.
When you are finished editing data, click Edit or click another tool on the Designer toolbar to close the Editing pane.

Adjust settings

In Settings Map properties , you can access tooltips and snapping options to help you while editing.

Use tooltips and editing constraints

Click the Enable tooltips toggle button to turn tooltips on and off, such as elevation and distance. While creating features, you can control the lengths of segments and the angles between them, and elevations of points and vertices. To set the editing constraints, turn tooltips on and press Tab to enter the values.

Click the Enable segment labels toggle button to turn segment labels on and off.

Use snapping

When updating and creating features, you can snap to vertices and edges, as well as enable parallel and perpendicular snapping.

To use snapping options, complete the following steps:

Click the Enable snapping toggle button to turn the following snapping options on or off:
- Geometry guides—When you enable this option while creating or editing, Scene Viewer displays visual guides to help you identify lines in that feature that are perpendicular or parallel to the current segment.
  In the image below, a square appears where two lines of the polygon are perpendicular to one another, and small lines appear on either side of the line that is being drawn parallel to another line in the polygon.
- Feature to feature—When you enable this option while creating or editing, the vertices of the feature snap to the vertex, edge, or endpoint of an existing feature.
  In the example below, the editor draws the larger feature so that the vertex and edge of the new feature snap to coincide with the vertex and edge of an existing rectangular feature.
Under Snapping layers, click the expand button to expand the snapping layers available.
Check the check boxes of the layers to snap to while updating and creating features.

Tip:

Press the Ctrl key to temporarily disable the snapping settings. Release the Ctrl key to enable snapping again.

Feedback on this topic?

Tip:

Edit a feature

Note:

Note:

Create features

Note:

Tip:

Adjust settings

Use tooltips and editing constraints

Use snapping

Tip:

In this topic