10000

GetDocumentInfo has started.

Provides a set of map service properties that can be used to describe the general content of the service.

10001

GetDocumentInfo has completed.

Use this code to determine how long it takes this method to process.

10002

GetMapCount has started.

Returns the number of maps (data frames) in a map service.

10003

GetMapCount has completed.

Use this code to determine how long it takes this method to process.

10004

GetMapName has started.

Returns the name of the map (data frame) as indicated by the index value provided.

10005

GetMapName has completed.

Use this code to determine how long it takes this method to process.

10006

GetDefaultMapName has started.

Name of the active map (data frame) in a map service.

10007

GetDefaultMapName has completed.

Use this code to determine how long it takes this method to process.

10008

GetServerInfo has started.

Returns information about the present state of a map (data frame).

10009

GetServerInfo has completed.

Use this code to determine how long it takes this method to process.

10010

Begin ExportMapImage.

Generates a dynamic map image from a data frame (map) in a map service.

10011

End ExportMapImage.

Use this message to determine how long it takes the server to dynamically draw a map image. Using the ArcGIS REST API, this message can be mined over a period of time and used to derive service performance statistics.

10012

ExportScaleBar has started.

Generates a scale bar image for a data frame (map) in a map service.

10013

ExportScaleBar has completed.

Use this code to determine how long it takes this method to process.

10014

Find has started.

Searches the attributes of one or more layers in a data frame, in a map service for a given search string.

10015

Find has completed.

Use this code to determine how long it takes this method to process.

10016

Identify has started.

Returns map features and their attribute values based on a spatial search.

10017

Identify has completed.

Use this code to determine how long it takes this method to process.

10018

QueryFeatureCount has started.

Returns the number of the features that meet the query filter selection criteria for the specified layer ID.

10019

QueryFeatureCount has completed.

Use this code to determine how long it takes this method to process.

10020

QueryFeatureIDs has started.

Returns a set of feature IDs that meet the query filter selection criteria for the specified layer ID.

10021

QueryFeatureIDs has completed.

Use this code to determine how long it takes this method to process.

10022

QueryFeatureData has started.

Returns a record set of features (geometry and attributes) that meet the query filter selection criteria for the specified layer ID.

10023

QueryFeatureData has completed.

Use this code to determine how long it takes this method to process.

10024

QueryFeatureCount2 has started.

Returns the count of the features that meet the query filter selection criteria for the specified layer description.

10025

QueryFeatureCount2 has completed.

Use this code to determine how long it takes this method to process.

10026

QueryFeatureIDs2 has started.

Returns the IDs of the features that meet the query filter selection criteria for the specified layer description.

10027

QueryFeatureIDs2 has completed.

Use this code to determine how long it takes this method to process.

10028

QueryFeatureData2 has started.

Returns a record set of features that meet the query filter selection criteria for the specified layer description.

10029

QueryFeatureData2 has completed.

Use this code to determine how long it takes this method to process.

10030

QueryHyperlinks has started.

Returns feature geometry and associated hyperlink URL for visible layers within a defined map extent.

10031

QueryHyperlinks has completed.

Use this code to determine how long it takes this method to process.

10032

ComputeScale has started.

Calculates the scale of the specified map (data frame) at the given map extent for an image with the given size.

10033

ComputeScale has completed.

Use this code to determine how long it takes this method to process.

10034

ComputeDistance has started.

Calculate the distance between two points in a map (data frame).

10035

ComputeDistance has completed.

Use this code to determine how long it takes this method to process.

10036

ToMapPoints has started.

Converts points from screen coordinates to map coordinates.

10037

ToMapPoints has completed.

Use this code to determine how long it takes this method to process.

10038

FromMapPoints has started.

Converts map coordinates to screen coordinates.

10039

FromMapPoints has completed.

Use this code to determine how long it takes this method to process.

10040

GetLegendInfo has started.

Returns legend information, such as layer name, group heading, classification labels, and symbol swatches, for layers in a map.

10041

GetLegendInfo has completed.

Use this code to determine how long it takes this method to process.

10042

GetSQLSyntaxInfo has started.

Returns SQL syntax information for the specified layer.

10043

GetSQLSyntaxInfo has completed.

Use this code to determine how long it takes this method to process.

10044

GetSupportedImageReturnTypes has started.

Returns the supported formats for retrieving images generated by a map service.

10045

GetSupportedImageReturnTypes has completed.

Use this code to determine how long it takes this method to process.

10046

IsFixedScaleMap has started.

Determines whether a map (data frame) has a cache. The cache may be a single fused map or a layer cache.

10047

IsFixedScaleMap has completed.

Use this code to determine how long it takes this method to process.

10048

HasSingleFusedMapCache has started.

Determines whether a map (data frame) has fused cache. Each map in a map service can only have one fused cache.

10049

HasSingleFusedMapCache has completed.

Use this code to determine how long it takes this method to process.

10050

GetTileCacheInfo has started.

Get cache configuration properties for a given map.

10051

GetTileCacheInfo has completed.

Use this code to determine how long it takes this method to process.

10052

GetTileImageInfo has started.

Get information about the image format of the cache tiles.

10053

GetTileImageInfo has completed.

Use this code to determine how long it takes this method to process.

10054

GetMapTile has started.

Returns the image tile from a fused map cache for a specific location.

10055

GetMapTile has completed.

Use this code to determine how long it takes this method to process.

10056

HasLayerCache has started.

Determines whether a given layer in a map (data frame) has a layer cache.

10057

HasLayerCache has completed.

Use this code to determine how long it takes this method to process.

10058

GetLayerTile has started.

Returns the image tile from a layer cache for a specific location.

10059

GetLayerTile has completed.

Use this code to determine how long it takes this method to process.

10060

GetVirtualCacheDirectory has started.

Gets the virtual directory containing the cache tiles for a given layer within a map (data frame).

10061

GetVirtualCacheDirectory has completed.

Use this code to determine how long it takes this method to process.

10062

GetCacheName has started.

Gets the cache name for a given layer within a map (data frame).

10063

GetCacheName has completed.

Use this code to determine how long it takes this method to process.

10064

GetCacheDescriptionInfo has started.

Gets the cache description information for a given map. This includes cache control info, tile cache info, tile image info, and cache type info.

10065

GetCacheDescriptionInfo has completed.

Use this code to determine how long it takes this method to process.

10066

GetCacheControlInfo has started.

Gets the cache control information for a given map. This is primarily used to determine whether client caching is allowed.

10067

GetCacheControlInfo has completed.

Use this code to determine how long it takes this method to process.

10068

GetServiceConfigurationInfo has started.

Returns a set of name-value pairs that contain information on map service configuration restrictions.

10069

GetServiceConfigurationInfo has completed.

Use this code to determine how long it takes this method to process.

10070

ExportLayout has started.

Generates an image of the layout, based on the given page description object, and writes the image to a specified file on disk.

10071

ExportLayout has completed.

Use this code to determine how long it takes this method to process.

10072

ExportLegend has started.

Exports a legend to an image file. This is not available through an internet connection to a map service.

10073

ExportLegend has completed.

Use this code to determine how long it takes this method to process.

10074

ExportNorthArrow has started.

Exports a north arrow to an image file. This is not available through an internet connection to a map service.

10075

ExportNorthArrow has completed.

Use this code to determine how long it takes this method to process.

10076

FromPagePoints has started.

Converts a page coordinate to a screen location. This is not available through an internet connection to a map service.

10077

FromPagePoints has completed.

Use this code to determine how long it takes this method to process.

10078

ToPagePoints has started.

Converts a screen location to a page coordinate. This is not available through an internet connection to a map service.

10079

ToPagePoints has completed.

Use this code to determine how long it takes this method to process.

10080

ApplyMapDescription has started.

Applies the current state of the map description to the map server object. This is not available through an internet connection to a map service.

10081

ApplyMapDescription has completed.

Use this code to determine how long it takes this method to process.

10082

RefreshServerObjects has started.

Updates the server info based on the current state of the underlying fine-grained objects. This is not available through an internet connection to a map service.

10083

RefreshServerObjects has completed.

Use this code to determine how long it takes this method to process.

10084

Find for layer <layer name> has started.

Searches the attributes for a specific layer in a data frame, in a map service for a given search string.

10085

Find for layer <layer name> has completed.

Use this code to determine how long it takes this method to process.

10086

Identify for layer <layer name> has started.

Returns map features and their attribute values based on a spatial search for a specific layer.

10087

Identify for layer <layer name> has completed.

Use this code to determine how long it takes this method to process.

10088

QueryHyperlinks for layer <layer name> has started.

Returns feature geometry and an associated hyperlink URL for a specific layer within a defined map extent.

10089

QueryHyperlinks for layer <layer name> has completed.

Use this code to determine how long it takes this method to process.

10090

GetLegendInfo for layer <layer name> has started.

Returns legend information, such as layer name, group heading, classification labels, and symbol swatches, for a specific layer in a map.

10091

GetLegendInfo for layer <layer name> has completed.

Use this code to determine how long it takes this method to process.

10092

MapReaderOpen has started.

Opens an MXD or PMF file stored at the specified path.

10093

MapReaderOpen has completed.

Use this code to determine how long it takes this method to process.

10094

Preparation for method: <method name> has started.

Use this code to determine how long it takes this method to process.

10095

Preparation for method: <method name> has completed.

Use this code to determine how long it takes this method to process.

10096

QueryOperation_Start

This message is used for QueryFeatureData and QueryFeatureData2.

10097

QueryOperation_End

Use this code to determine how long it takes this method to process.

10098

ImageGeneration_Started

This creates the image file from the map service.

10099

ImageGeneration_End

Use this code to determine how long it takes this method to process.

10138

Extent:<XMin>,<YMin>,<XMax>,<YMax>;Size:<size 1>,<size 2>;Scale:<scale value>

In an ExportMapImage request, this code returns the extent (in map service units), size (in pixels), and scale (representative fraction) of the requested map image.

103023

Symbol Drawing

The map symbol is drawn as part of the method Map.Draw.

103024

Data Access

Symbolizing

Execute Query

The data representing the symbol is accessed, symbolization is initialized, and a query is run to obtain the feature symbology.

10800

MapServerFailed

A number of errors may occur during the MapServer:Connect method. Details of the specific error should be written within the text of the message.

10801

The layer <layer name> in Map: <map name> is invalid.

This would occur when there is a layer with a broken link in the map being served. The map should be checked for layers having broken links to their data. These should be repaired and the map service refreshed after the repair.

10802

InvalidLicense

10803

Unsupported request name

10804

The requested capability is not supported.

These are the capabilities set by the server administrator.

10805

Invalid or Invisible field in SubField of the QueryFilter

This message results when the QueryFilter in a QueryFeatureData or QueryFeatureData2 contains an invalid field. An invalid field can be either a field that is marked as not visible in the original map document being served or by specifying a field in the query that does not exist in the map service.

10806

Service is Disconnected From Data

This warning would occur when attempting to perform one of the following methods on a map service layer that is not connected to its data source: Find, Identify, QueryFeatureCount, QueryFeatureCount2, QueryFeatureIds, QueryFeatureIds2, QueryFeatureData, QueryFeatureData2, QueryHyperlinks, GetLegendInfo, and GetSQLSyntaxinfo.

10807

The document contains secure (password-protected) layers.

Maps containing secure layers cannot be served. To successfully serve the map, layers requiring a password must be removed from the map.

10808

File <file name> is invalid. File <file name> does not exist. Access to file <file name> is denied.

To successfully serve a map document, the map document must be valid and accessible to the ArcGIS Server account. Something may have corrupted the file, and the map document may need to be re-created. The permissions to the map document and the directory it resides in should also be checked.

10809

PMF File <file name> is only readable by the ArcReader application.

PMFs (Published Map File) can be configured such that only ArcReader can open the document. PMFs configured in this way cannot be served. To serve such a map, a new PMF must be authored such that applications other than ArcReader can open the PMF.

10810

This PMF cannot be served because the following functionality in it has been disabled: <name of functionality>

PMFs (Published Map File) can be configured such that the PMF restricts specified functionality. This functionality can include export, find, identify, change views, access hyperlinks, change layer visibility, measure, query, query value, and view the TOC. Whenever functionality has been disabled when publishing a PMF, the PMF cannot be served. To serve such a map, a new PMF must be authored such that no functionality is disabled.

10811

PMF File <file name> is password protected and cannot be used for a server.

PMFs (Published Map File) that are password protected cannot be served. To serve the map, a new PMF must be authored without password protection.

10812

PMF File <file name> has timed out.

PMFs (Published Map File) can be authored with a timeout option. Once the date of the timeout has been exceeded, the PMF cannot be opened, and a map service based on such a PMF can no longer be served.

10813

Unable to read the specified PMF document.

To successfully serve a PMF (Published Map File), the PMF must be valid and accessible to the ArcGIS Server account. The PMF may need to be re-created. The permissions to the PMF file and the directory it resides in should also be checked.

10814

Cannot open PMF file <file name>. Probable cause: The PMF file is inaccessible to Server.

To successfully serve a PMF (Published Map File), the PMF must be valid and accessible to the ArcGIS Server account. The PMF may need to be re-created. The permissions to the PMF file and the directory it resides in should also be checked.

10815

PMF File <file name> contains a Globe and cannot be opened by the MapServer.

PMFs (Published Map File) can contain globes. Such PMFs cannot be used to author a map service. To create a map service, the globe must be removed from the map and the PMF republished.

10816

PMF Document <file name> cannot be opened.

To successfully serve a PMF (Published Map File), the PMF must be valid and accessible to the ArcGIS Server account. The PMF may need to be re-created. The permissions to the PMF file and the directory it resides in should also be checked.

10817

PMFInvalidFileType

To successfully serve a PMF (Published Map File), the PMF must be valid and accessible to the ArcGIS Server account. The PMF may need to be re-created. The permissions to the PMF file and the directory it resides in should also be checked.

10818

PMFUnknownError

10819

MissingParameter

A request made to the map service is missing a required parameter.

10820

OutputDirectoryNotFound

The Output directory is where the server creates temporary files for the map service. This directory is specified by the server administrator when publishing a map service and is part of the map service configuration. This directory must exist and be accessible to the ArcGIS Server account. Check the existence and the accessibility of this directory.

10821

OutputDirectoryAccessDenied

The Output directory is where the server creates temporary files for the map service. This directory is specified by the server administrator when publishing a map service and is part of the map service configuration. This directory must exist and be accessible to the ArcGIS Server account. Check the existence and the accessibility of this directory.

10822

PropertyFilePathUndefined

This error occurs when MapServer cannot find the property for FilePath in the property set.

10823

IsCacheMissing

IsCached is a map service configuration indicating whether the map service has a cache. Check the configuration file to make sure this setting is present and is set appropriately.

10824

CacheOnDemandMissing

CacheOnDemandMissing is a map service configuration indicating whether the map service provides on-demand caching. Check the configuration file to make sure this setting is present and is set appropriately.

10825

IgnoreCacheMissing

IgnoreCacheMissing is a map service configuration indicating whether the map service is to ignore an existing cache. Check the configuration file to make sure this setting is present and is set appropriately.

10826

ClientCachingAllowedMissing

ClientCachingAllowedMissing is a map service configuration. Check the configuration file to make sure this setting is present and is set appropriately.

10827

MapServer::OnStart() failed: can't create temp directory name.

MapServer creates a directory for each map service underneath the arcgisoutput directory. These directories are used for WMS files if the WMS capability is enabled for the service. This error may occur if the ArcGIS Server account cannot create the directory. Make sure that the ArcGIS Server account has proper permission to the arcgisoutput directory.

10828

MapServer::OnStop() failed: can't create temp directory name.

MapServer creates a directory for each map service underneath the arcgisoutput directory. These directories are used for WMS files if the WMS capability is enabled for the service. This error may occur if the ArcGIS Server account cannot create the directory. Make sure that the ArcGIS Server account has proper permission to the arcgisoutput directory.

10829

Invalid service configuration. A service disconnected from data cannot ignore cache.

A map service disconnected from its data needs to use a cache. In cases in which the map service is disconnected from its data, the property IgnoreCache must be false.

10830

Invalid service configuration. A service cannot be in Cache On Demand mode and disconnected from the data.

A map service using Cache On Demand cannot be disconnected from its data.

10831

Invalid service configuration. A service cannot be in Cache On Demand mode and ignore cache.

A map service using Cache On Demand needs to use a cache. When a map service is using Cache On Demand, the property IgnoreCache must be false.

10832

MapServer construction failed. Unable to obtain pointer to IServerEnvironment.

10833

Does not have Server Object administration privileges.

10834

Unable to connect to the cache

10835

The configuration could not be started because the WMS capability requires an assigned output directory. Please assign an output directory to this service.

10836

MapNotFound

Many requests require a map name as a parameter. This error occurs when the value of the map name in a MapServer request does not match a valid available map service name.

10837

General Geodatabase error

There are a number of things that can cause an error within the geodatabase. This Map Server error wraps any geodatabase error in a single Map Server error code.

10838

No Layer found with ID: <ID number>

LayerID supplied was incorrect.

10849

An invalid where clause or definition expression has been requested: "<where clause or definition expression>"

This message is logged if database-specific functions and syntax are used in a query. If this message is continually logged, it may indicate a potential security threat or SQL injection attack.

To learn more, see About standardized queries.

103000

Beginning of layer draw: <layer name>

The layer draw is part of the geography phase.

103001

End of layer draw: <layer name>

Use this code to determine how long it takes a layer to draw.

103002

Beginning of group layer draw: <layer name>

The group layer draw is part of the geography phase.

103003

End of group layer draw: <layer name>

Use this code to determine how long it takes all the member layers of a group layer to draw.

103004

Beginning of geography phase

This is the phase in which the features of individual layers draw. This phase includes running a query (code 103021) against the layer's data along with the drawing of layer features. Also, for layers based on feature classes, a count of features being drawn is reported (code 103019).

103005

End of geography phase

Use this code to determine how long it takes all layers in the map to draw.

103006

Beginning of annotation phase

This is the phase in which graphics, labeling, and annotation draw.

103007

End of annotation phase

Use this code to determine how long it takes graphics, labeling, and annotation in the map to draw.

103008

Beginning of selection draw phase

This is the phase in which selected features draw.

103009

End of selection draw phase

Use this code to determine how long it takes selected features in the map to draw.

103010

Beginning of graphic selection draw phase

This is the phase in which selected graphics draw.

103011

End of graphic selection draw phase

Use this code to determine how long it takes selected graphics in the map to draw.

103012

Beginning of custom draw phase of the map

This is the phase in which custom features or elements draw. This is also known as the "after draw". These features or elements are often generated by extension software. It is important to note that these are not custom layers.

103013

End of custom draw phase of the map

Use this code to determine how long it takes the custom features or elements in the map to draw.

103014

Beginning of the graphics drawing

This is part of the annotation phase.

103015

End of graphics drawing

Use this code to determine how long it takes graphics in the map to draw.

103016

Beginning of the labeling

This is part of the annotation phase.

103017

End of the labeling

Use this code to determine how long it takes labeling in the map to draw.

103018

Labeling Layers:

This is the list of layers in the map that are being labeled. Also included is the list of layers that provide barriers to label placement.

103019

Feature count:

This is the count of features drawn for a particular layer at a given extent.

103020

Graphic count:

This is the count of graphics drawn for a particular layer at a given extent.

103021

Executing query

Use this code to determine how long it takes for a layer based on a feature class to query the database when drawing.

103022

Drawing as masking layer

The layer being used as a masking layer.

103800

LayerDrawingError

Indicates that a drawing error has occurred.